PublishedCisco Press, April 2017 |
ISBN9780789757760 |
FormatDvd |
Dimensions10cm × 10cm × 10cm |
CCNA Routing and Switching interactive learning:
More than 250 labs
More than 5,000 hands-on tasks
Four Kinds of Labs:
Skill Builders
Subnetting Exercises
Configuration Scenarios
Troubleshooting Scenarios
The CCNA Routing and Switching 200-125 Network Simulator is a single-user software package. It helps users develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab
hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 400 structured labs designed to help you learn by doing, the most effective method of learning.
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S 200-125 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Master the hands-on skills needed to succeed on the CCNA exam, including:
Router and switch navigation and administration
Ethernet LAN switches
VLANs, trunking, and switch security
Connected and static routes
RIPv2 configuration and verification
Access Control Lists (ACL)
NAT, syslog, and NTP configuration
IPv4 and IPv6 addressing and subnetting
Network troubleshooting
STP and VTP
OSPF and EIGRP on IPv4 and IPv6
External BGP
Point-to-point WANs and private WANs
HSRP
Network management
Skill Builders:
These 250+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
Router and switch CLI navigation
Configuring IP addresses and DHCP
servers
VLAN and trunking configuration
Switch security
STP, VTP, Portfast, and BPDU guard configuration
Static and dynamic EtherChannel
Serial configuration and authentication
Connected, static, and default routes
RIPv2, OSPF, and EIGRP configuration
eBGP and MPLS
ACL analysis and configuration
NAT configuration
Syslog, NTP, HSRP, GRE tunnels, SNMP, IP SLA, and SPAN
Subnetting Exercises:
These 80 labs help you to perform subnetting calculations quickly and accurately, a critical skill for success on the CCNA exam. Topics covered include:
IPv4 and IPv6 subnet ID calculation
IP address rejection
IP route selection
VLSM overlaps
IPv6 EUI-64 calculation
Selecting VLSM routes
Configuration Scenarios:
These 50+ labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills
to the test. Topics covered include:
Network fundamentals and administration
IP addressing
STP and VTP
Static and default routing
Serial link configuration
RIPv2, OSPF, and EIGRP
Router-on-a-stick to MLS
Standard and extended ACLs
NAT configuration
HSRP
Troubleshooting Scenarios:
These 30 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test
your ability to perform the job of a network engineer. Topics covered include:
Switch forwarding
VLAN troubleshooting
Path analysis and troubleshooting
Port security
STP
Network discovery
IP addressing and routing
DHCP server troubleshooting
NAT
EIGRP and OSPF
IPv6, MLS, and GRE tunnels
Router-on-a-stick
System requirements:
Windows system requirements (minimum):
Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
16 GB available hard disk space (32-bit) or 20 GB (64-bit)
DirectX 9 graphics device with WDDM 1.0 or higher driver
Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
macOS 10.12, 10.11, or 10.10
Intel core Duo 1.83 GHz
512 MB RAM (1 GB recommended)
1.5 GB hard disk space
32-bit color depth at 1024x768 resolution
Adobe Acrobat Reader version 8 and above
